Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
... (39 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
... (35 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_raw_qc (quality control flags for raw 700 nm wavelength backscatter)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
backscatter_scaled_qc (quality control flags for 700 nm β total volume scattering coefficient at 117 degree angle)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_qc (quality control flags for colored dissolved organic matter)
cdom_raw (raw colored dissolved organic matter, counts)
cdom_raw_qc (quality control flags for raw colored dissolved organic matter)
chlorophyll (mg m-3)
... (44 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_raw_qc (quality control flags for raw 700 nm wavelength backscatter)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
backscatter_scaled_qc (quality control flags for 700 nm β total volume scattering coefficient at 117 degree angle)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_qc (quality control flags for colored dissolved organic matter)
cdom_raw (raw colored dissolved organic matter, counts)
cdom_raw_qc (quality control flags for raw colored dissolved organic matter)
chlorophyll (mg m-3)
... (40 more variables)


Fixed gears: Oceanographic data from fishing vessels

Summary:
Ocean data collected via fixed gear fishing vessels. Location does not change over a fishing operation. Aggregated from both science and industry programs. Basic QC routine has been applied, and all flagged data is removed.

cdm_data_type = Point
VARIABLES:
time (Datetime, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (m)
temperature (degree_C)
salinity (Sea Water Practical Salinity, PSU)
sensor_type
vessel_gear_type (Fishing Gear Used as a Sensor Platform)
data_collection_program (Data Collection Program or Industry Body)
vessel_id (Confidential Unique Vessel Identifier)
tow_id (Unique Fishing Operation Identifier)
segment_type (Fishing Stage When Data is Collected)
platform_code
platform_name
WMO_ID (Confidential Unique WMO Identifier)
DOI (Digital Object Identifier)
qc_vessel_region (Flag Vessel Region Test)
qc_gear_type (Flag Gear Type Test)
qc_date (Flag Date Test)
qc_location (Flag Location Test)
qc_speed (Flag Speed Test)
qc_global_range (Flag Global Range Test)
qc_temp_spike (Flag Temperature Spike Test)
qc_sal_spike (Flag Salinity Spike Test)
qc_rollover (Flag Rollover Test)
... (4 more variables)


Global Ocean Data Analysis Project (GLODAP) v2.2021

Summary:
The Global Ocean Data Analysis Project (GLODAP) is a synthesis activity for ocean surface to bottom biogeochemical data collected through chemical analysis of water samples. Data for 12 core variables (salinity, oxygen, phosphate, nitrate, silicate, dissolved inorganic carbon, total alkalinity, pH, CFC-11, CFC-12, CFC-113 and CCl4) are subjected to primary and secondary quality control to identify outliers and correct for measurement biases.

cdm_data_type = Other
VARIABLES:
G2cruise
G2region
G2station
G2cast
G2year
G2month
G2day
G2hour
G2minute
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
G2bottomdepth
G2maxsampdepth
G2bottle
G2pressure
G2depth
G2temperature
G2theta
G2salinity (Sea Water Practical Salinity, PSU)
G2salinityf (Sea Water Practical Salinity, PSU)
G2salinityqc
G2sigma0
... (84 more variables)


Global Ocean Data Analysis Project (GLODAP) v2.2023

Summary:
This NCEI Accession consists of the GLODAPv2.2023 data product composed of data from 1108 scientific cruises covering the global ocean between 1972 and 2021. It includes full depth discrete bottle measurements of salinity, oxygen, nitrate, silicate, phosphate, dissolved inorganic carbon (TCO2), total alkalinity (TAlk), CO2 fugacity (fCO2), pH, chlorofluorocarbons (CFC-11, CFC-12, CFC-113, and CCl4), SF6, and various isotopes and organic compounds. It was created by appending data from 23 cruises to GLODAPv2.2022 (Lauvset et al., 2022, NCEI Accession 0257247). The data for salinity, oxygen, nitrate, silicate, phosphate, TCO2, TAlk, pH, CFC-11, CFC-12, CFC-113, CCl4, and SF6 were subjected to primary and secondary quality control. Severe biases in these data have been corrected for, and outliers removed. However, differences in data related to any known or likely time trends or variations have not been corrected for. These data are believed to be accurate to 0.005 in salinity, 1% in oxygen, 2% in nitrate, 2% in silicate, 2% in phosphate, 4 µmol kg-1 in TCO2, 4 µmol kg-1 in TAlk, and for the halogenated transient tracers and SF6: 5%

cdm_data_type = Other
VARIABLES:
G2cruise
G2region
G2station
G2cast
G2year
G2month
G2day
G2hour
G2minute
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
G2bottomdepth
G2maxsampdepth
G2bottle
G2pressure
... (91 more variables)


GRDC MEAN MONTHLY DISCHARGE (MQ)

Summary:
GRDC Mean Monthly Discharge (mq). GRDC data from a local source.

cdm_data_type = Other
VARIABLES:
GRDCno (GRDC number)
time (YYYY-MM-DD, seconds since 1970-01-01T00:00:00Z)
Original (original (provided) data)
Calculated (GRDC calculated from daily data)
Flag (percentage of valid values used for calculation from daily data)


GRDC MEAN MONTHLY DISCHARGE (MQ) - CHEMISTRY

Summary:
GRDC Mean Monthly Discharge (mq). GRDC data from a local source. CHEMISTRY

cdm_data_type = Other
VARIABLES:
GRDCno (GRDC number)
time (seconds since 1970-01-01T00:00:00Z)
Original (original (provided) data)
Calculated (GRDC calculated from daily data)
Flag (percentage of valid values used for calculation from daily data)


Hydrobios-CTD data collected by the CCGS Amundsen in the Canadian Arctic

Summary:
The Canadian research icebreaker CCGS Amundsen is equipped with multi-plankton sampler system called Hydrobios. The MultiNet Type Maxi, part of the system, is used for vertical collections. An integrated CTD unit is also integrated to the system and allows recording of the sampled water characteristics. This dataset is composed of CTD profiles and specific data for the volume of water going through the nets during their operation. The Hydrobios was deployed during the Amundsen scientific expeditions in the summer and fall between 2003 and 2019 with the exception of 2004, 2005, 2009, 2011 and 2012, where no data is available. The integrated CTD sensors are from the Hydrobios company itself. The Hydrobios-CTD data were corrected and controlled by comparing them to CTD-Rosette data when available. Outliers and suspicious measurements were removed from the dataset. Variables are provided for every 2 decibars (dbar) between the maximum and minimum pressure recorded for each cast. Research programs participating in the Amundsen expeditions between 2003 and 2016 include CASES, ArcticNet, CFL, Geotraces, Malina, IOL and BP, BREA, Weston, Netcare, JAMSTEC, Statoil, iBO, GreenEdge, BAYSYS and DFO programs. In-situ data belong to and are under the responsibility of the leading Nets scientists while physical and chemical data from the sensors are part of the Amundsen core data collection.

cdm_data_type = Point
VARIABLES:
depth (m)
TEMP (sea temperature, degree_Celsius)
PSAL (practical salinity, PSU)
latitude (degrees_north)
longitude (degrees_east)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
depth_QC (depth quality flag, 1)
TEMP_QC (TEMP quality flag, 1)
PSAL_QC (PSAL quality flag, 1)

Canadian Cryospheric Information Network


Iberian Margin GEOSTAR 2007 CTD data

Summary:
The dataset contains sea bottom Conductivity, Temperature and Pressure data (about 1 m above the bottom) acquired through a SBE 16 plus installed on GEOSTAR station. The collection period ranges from August 2007 through July 2008.

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
longitude (longitude of measurements, degrees_east)
latitude (latitude of measurements, degrees_north)
TEMP (temperature, degree_C)
CNDC (conductivity, Siemens per metre)
PRES (pressure, decibar)
PSAL (Practical salinity of the water body, PSU)
PTEMP (potential temperature of sea water, degree_C)
ASAL (Absolute salinity of the water body, Grams per kilogram)
RHO (in-situ density, Kilograms per cubic metre)
TIME_QC (TIME quality control flags)
DEPTH_QC (DEPTH quality control flags)
POSITION_QC (POSITION quality control flags)
TEMP_QC (TEMP quality control flags)
CNDC_QC (CNDC quality control flags)
PRES_QC (PRES quality control flags)

Istituto Nazionale Geofisica e Vulcanologia - Sez. Roma2


Iberian Margin GEOSTAR 2009 CTD data

Summary:
The dataset contains sea bottom Conductivity, Temperature and Pressure data (about 1 m above the bottom) acquired through a SBE 16 plus installed on GEOSTAR station. The collection period ranges from November 2009 through July 2010.

cdm_data_type = TimeSeries
VARIABLES:
time (time of measurements, seconds since 1970-01-01T00:00:00Z)
depth (depth of measurements, m)
longitude (longitude of measurements, degrees_east)
latitude (latitude of measurements, degrees_north)
TEMP (temperature, degree_C)
CNDC (conductivity, Siemens per metre)
PRES (pressure, decibar)
PSAL (Practical salinity of the water body, PSU)
PTEMP (potential temperature of sea water, degree_C)
ASAL (Absolute salinity of the water body, Grams per kilogram)
RHO (in-situ density, Kilograms per cubic metre)
TIME_QC (TIME quality control flags)
DEPTH_QC (DEPTH quality control flags)
POSITION_QC (POSITION quality control flags)
TEMP_QC (TEMP quality control flags)
CNDC_QC (CNDC quality control flags)
PRES_QC (PRES quality control flags)


ICES_CTD

Summary:
ICES_CTD

cdm_data_type = TimeSeriesProfile
VARIABLES:
Cruise
Station
PLATFORMCODE
Type
Year
Month
Day
Hour
Minute
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
Bot_Depth (Bot. Depth [m], m)
QV_ODV
Secchi_Depth (Secchi Depth [m]:METAVAR:FLOAT, m)
QV_ODV_1
depth (m)
QV_ODV_2
Pressure (Pressure [dbar], dbar)
QV_ODV_3
Temperature (Temperature [deg C], degreeC)
QV_ODV_4
Practical_Salinity (Sea Water Practical Salinity, PSU)
QV_ODV_5
Dissolved_Oxygen_ml_l (Volume Fraction Of Oxygen In Sea Water, ml/l)
QV_ODV_6
Dissolved_Oxygen_ml_kg (Volume Fraction Of Oxygen In Sea Water, ml/kg)
... (39 more variables)


ICES_MooringData

Summary:
ICES_MooringData

cdm_data_type = TimeSeriesProfile
VARIABLES:
Cruise
Station
Type
Year
Month
Day
Hour
Minute
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
Bot_Depth (Bot. Depth [m], m)
Bot_Depth_QV_ODV (QV:ODV)
depth (m)
QV_ODV
Temperature (Temperature [deg C], degreeC)
Temperature_QV_ODV (QV:ODV)
Practical_Salinity (Sea Water Practical Salinity, PSU)
Practical_Salinity_QV_ODV (QV:ODV)
Phosphate_Phosphorus (Mass Concentration Of Phosphate In Sea Water, umol/l)
Phosphate_Phosphorus_QV_ODV (QV:ODV)
Silicate_Silicon (Mass Concentration Of Silicate In Sea Water, umol/l)
Silicate_Silicon_QV_ODV (QV:ODV)
Nitrate_Nitrogen (Mole Concentration Of Nitrate In Sea Water, umol/l)
Nitrate_Nitrogen_QV_ODV (QV:ODV)


ICES_XBT

Summary:
ICES_XBT

cdm_data_type = TimeSeriesProfile
VARIABLES:
Cruise
latitude (degrees_north)
longitude (degrees_east)
Station
time (seconds since 1970-01-01T00:00:00Z)
Type
Year
Month
Day
Hour
Minute
Bot_Depth (Bot. Depth [m], m)
Bot_Depth_QV_ODV (QV:ODV)
depth (m)
Depth_QV_ODV (QV:ODV)
Pressure (Pressure [dbar], dbar)
Pressure_QV_ODV (QV:ODV)
Temperature (Temperature [deg C], degreeC)
Temperature_QV_ODV (QV:ODV)


Summary:
IZOR - Collection of air temperature in dry bulb (DRYT) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
DRYT (air temperature in dry bulb, degree_Celsius)
DRYT_QC (DRYT quality flag, 1)
DRYT_DM (DRYT method of data processing)
url_metadata (Metadata Link)
qc_entity


Summary:
IZOR - Collection of atmospheric pressure at sea level (ATMS) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
ATMS (atmospheric pressure at sea level, hPa)
ATMS_QC (ATMS quality flag, 1)
ATMS_DM (ATMS method of data processing)
url_metadata (Metadata Link)
qc_entity


Summary:
IZOR - Collection of colored dissolved organic matter (CDOM) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
CDOM (colored dissolved organic matter, 1e-9)
CDOM_QC (CDOM quality flag, 1)
CDOM_DM (CDOM method of data processing)
url_metadata (Metadata Link)
qc_entity


Summary:
IZOR - Collection of dew point temperature (DEWT) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
DEWT (dew point temperature, degree_Celsius)
DEWT_QC (DEWT quality flag, 1)
DEWT_DM (DEWT method of data processing)
url_metadata (Metadata Link)
qc_entity


Summary:
IZOR - Collection of dissolved oxygen (DOX1) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
DOX1 (dissolved oxygen, ml/l)
DOX1_QC (DOX1 quality flag, 1)
DOX1_DM (DOX1 method of data processing)
url_metadata (Metadata Link)
qc_entity


Summary:
IZOR - Collection of electrical conductivity (CNDC) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
CNDC (electrical conductivity, S/m)
CNDC_QC (CNDC quality flag, 1)
CNDC_DM (CNDC method of data processing)
url_metadata (Metadata Link)
qc_entity


Summary:
IZOR - Collection of relative humidity (RELH) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
RELH (relative humidity, %)
RELH_QC (RELH quality flag, 1)
RELH_DM (RELH method of data processing)
url_metadata (Metadata Link)
qc_entity


Summary:
IZOR - Collection of sea temperature (TEMP) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
TEMP (water temperature, degree_Celsius)
TEMP_QC (TEMP quality flag, 1)
TEMP_DM (TEMP method of data processing)
url_metadata (Metadata Link)
qc_entity


Summary:
IZOR - Collection of Shortwave/solar incoming radiation (SINC) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
SINC (Shortwave/solar incoming radiation, W/m2)
SINC_QC (SINC quality flag, 1)
SINC_DM (SINC method of data processing)
url_metadata (Metadata Link)
qc_entity


Summary:
IZOR - Collection of South-north wind component (WSPN) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
WSPN (South-north wind component, m/s)
WSPN_QC (WSPN quality flag, 1)
WSPN_DM (WSPN method of data processing)
url_metadata (Metadata Link)
qc_entity


Summary:
IZOR - Collection of total chlorophyll (CHLT) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
CHLT (total chlorophyll, mg/m3)
CHLT_QC (CHLT quality flag, 1)
CHLT_DM (CHLT method of data processing)
url_metadata (Metadata Link)
qc_entity


Summary:
IZOR - Collection of water surface height above a specific datum (SLEV) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
SLEV (water surface height above a specific datum, m)
SLEV_QC (SLEV quality flag, 1)
SLEV_DM (SLEV method of data processing)
url_metadata (Metadata Link)
qc_entity


Summary:
IZOR - Collection of West-east wind component (WSPE) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
WSPE (West-east wind component, m/s)
WSPE_QC (WSPE quality flag, 1)
WSPE_DM (WSPE method of data processing)
url_metadata (Metadata Link)
qc_entity


Summary:
IZOR - Collection of wind direction, wind speed (WDIR_WSPD) TimeSeries - IN SITU MultiPointTimeSeriesObservation

cdm_data_type = TimeSeries
VARIABLES:
PLATFORMCODE (EMODnet Platform Code)
SOURCE
SENSOR (Platform Sensor)
time (Valid Time GMT, seconds since 1970-01-01T00:00:00Z)
TIME_QC (TIME quality flag, 1)
depth (m)
DEPTH_QC (DEPTH quality flag, 1)
latitude (degrees_north)
longitude (degrees_east)
POSITION_QC (POSITION quality flag, 1)
WDIR (wind from direction relative true north, degree)
WDIR_QC (WDIR quality flag, 1)
WDIR_DM (WDIR method of data processing)
WSPD (horizontal wind speed, m/s)
WSPD_QC (WSPD quality flag, 1)
WSPD_DM (WSPD method of data processing)
url_metadata (Metadata Link)
qc_entity


JASL/UHSLC Research Quality Tide Gauge Data (daily)

Summary:
The Joint Archive for Sea Level (JASL) Research Quality Data Set (RQDS) is a collaboration between the University of Hawaii Sea Level Center (UHSLC) and the World Data Center for Oceanography of the National Centers for Environmental Information (NCEI), National Oceanic and Atmospheric Administration (NOAA). The objective of the JASL RQDS is to assemble a well-documented, quality-controlled archive of hourly and daily sea level values that is appropriate for scientific research applications. The JASL RQDS is the largest global collection of quality-controlled hourly sea level data, and ongoing efforts seek to acquire new sites and uncover historic records as available.

cdm_data_type = TimeSeries
VARIABLES:
sea_level (relative sea level, millimeters)
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
station_name
station_country (station country (ISO 3166-1))
station_country_code (station country code (ISO 3166-1 numeric))
record_id (unique identifier for each record (i.e., station and version) in the database)
uhslc_id (unique station ID number used by the University of Hawaii Sea Level Center (UHSLC))
version (station version)
gloss_id (unique station ID number used by the WMO/IOC Global Sea Level Observing System (GLOSS))
ssc_id (unique station ID code in the Sealevel Station Catalog (SSC) produced by the WMO/IOC Sea Level Monitoring Facility (VLIZ))
decimation_method
reference_code
reference_offset (millimeters)


JASL/UHSLC Research Quality Tide Gauge Data (hourly)


Summary:
Summer 2022 Eastern Gotland Basin trials

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
depth_qc (quality control flags for glider depth)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
heading (glider heading angle, degrees)
internal_pressure (Pa)
internal_temperature (Celsius)
... (33 more variables)


Summary:
Summer 2022 Eastern Gotland Basin trials

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
heading (glider heading angle, degrees)
internal_pressure (Pa)
internal_temperature (Celsius)
linear_cmd (glider linear command, cm)
... (29 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
depth_qc (quality control flags for glider depth)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
heading (glider heading angle, degrees)
internal_pressure (Pa)
internal_temperature (Celsius)
... (33 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
heading (glider heading angle, degrees)
internal_pressure (Pa)
internal_temperature (Celsius)
linear_cmd (glider linear command, cm)
... (29 more variables)


Summary:
Demonstration deployment as part of eurofleet 2022

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
depth_qc (quality control flags for glider depth)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
heading (glider heading angle, degrees)
internal_pressure (Pa)
internal_temperature (Celsius)
... (33 more variables)


Summary:
Demonstration deployment as part of eurofleet 2022

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
heading (glider heading angle, degrees)
internal_pressure (Pa)
internal_temperature (Celsius)
linear_cmd (glider linear command, cm)
... (29 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_raw_secondary (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
backscatter_scaled_secondary (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
chlorophyll_raw_secondary (raw chlorophyll, counts)
chlorophyll_secondary (chlorophyll, mg m-3)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
depth_qc (quality control flags for glider depth)
... (38 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_raw_secondary (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
backscatter_scaled_secondary (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
chlorophyll_raw_secondary (raw chlorophyll, counts)
chlorophyll_secondary (chlorophyll, mg m-3)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
desired_heading (glider desired heading angle, degrees)
... (34 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
depth_qc (quality control flags for glider depth)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
heading (glider heading angle, degrees)
internal_pressure (Pa)
internal_temperature (Celsius)
... (30 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
heading (glider heading angle, degrees)
internal_pressure (Pa)
internal_temperature (Celsius)
linear_cmd (glider linear command, cm)
... (26 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
depth_qc (quality control flags for glider depth)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
down_irradiance_380 (Downwelling irradiance value of the 380 nm wavelength, W m-2 nm-1)
... (35 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
down_irradiance_380 (Downwelling irradiance value of the 380 nm wavelength, W m-2 nm-1)
down_irradiance_490 (Downwelling irradiance value of the 490 nm wavelength, W m-2 nm-1)
... (31 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
depth_qc (quality control flags for glider depth)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
down_irradiance_380 (Downwelling irradiance value of the 380 nm wavelength, W m-2 nm-1)
down_irradiance_490 (Downwelling irradiance value of the 490 nm wavelength, W m-2 nm-1)
down_irradiance_532 (Downwelling irradiance value of the 532 nm wavelength, W m-2 nm-1)
... (35 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
down_irradiance_380 (Downwelling irradiance value of the 380 nm wavelength, W m-2 nm-1)
down_irradiance_490 (Downwelling irradiance value of the 490 nm wavelength, W m-2 nm-1)
down_irradiance_532 (Downwelling irradiance value of the 532 nm wavelength, W m-2 nm-1)
downwelling_PAR (Downwelling PAR (Photosynthetically Active Radiation) in range 400-700 nm, μE m-2 s-1)
... (31 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
depth_qc (quality control flags for glider depth)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
down_irradiance_380 (Downwelling irradiance value of the 380 nm wavelength, W m-2 nm-1)
down_irradiance_490 (Downwelling irradiance value of the 490 nm wavelength, W m-2 nm-1)
down_irradiance_532 (Downwelling irradiance value of the 532 nm wavelength, W m-2 nm-1)
... (34 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
down_irradiance_380 (Downwelling irradiance value of the 380 nm wavelength, W m-2 nm-1)
down_irradiance_490 (Downwelling irradiance value of the 490 nm wavelength, W m-2 nm-1)
down_irradiance_532 (Downwelling irradiance value of the 532 nm wavelength, W m-2 nm-1)
downwelling_PAR (Downwelling PAR (Photosynthetically Active Radiation) in range 400-700 nm, μE m-2 s-1)
... (30 more variables)


Summary:
Part of AUV project. Voice of the Ocean Foundation data from a local source.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
depth_qc (quality control flags for glider depth)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
down_irradiance_380 (Downwelling irradiance value of the 380 nm wavelength, W m-2 nm-1)
down_irradiance_490 (Downwelling irradiance value of the 490 nm wavelength, W m-2 nm-1)
down_irradiance_532 (Downwelling irradiance value of the 532 nm wavelength, W m-2 nm-1)
... (34 more variables)


Summary:
Part of AUV project. Voice of the Ocean Foundation data from a local source.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
down_irradiance_380 (Downwelling irradiance value of the 380 nm wavelength, W m-2 nm-1)
down_irradiance_490 (Downwelling irradiance value of the 490 nm wavelength, W m-2 nm-1)
down_irradiance_532 (Downwelling irradiance value of the 532 nm wavelength, W m-2 nm-1)
downwelling_PAR (Downwelling PAR (Photosynthetically Active Radiation) in range 400-700 nm, μE m-2 s-1)
... (30 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (None)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
heading (glider heading angle, degrees)
internal_pressure (Pa)
internal_temperature (Celsius)
linear_cmd (glider linear command, cm)
... (26 more variables)


King Tubby57-20230307T1506

Summary:
Deployment part of QUICCHE cruise from Cape Town

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
... (35 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number2 (glider beam 1 measure from AD2CP in cell 2, m s-1)
ad2cp_beam2_cell_number2 (glider beam 2 measure from AD2CP in cell 2, m s-1)
ad2cp_beam3_cell_number2 (glider beam 3 measure from AD2CP in cell 2, m s-1)
ad2cp_beam4_cell_number2 (glider beam 4 measure from AD2CP in cell 2, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
... (36 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number2 (glider beam 1 measure from AD2CP in cell 2, m s-1)
ad2cp_beam2_cell_number2 (glider beam 2 measure from AD2CP in cell 2, m s-1)
ad2cp_beam3_cell_number2 (glider beam 3 measure from AD2CP in cell 2, m s-1)
ad2cp_beam4_cell_number2 (glider beam 4 measure from AD2CP in cell 2, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
... (32 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
... (36 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
... (32 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
time (seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (glider depth, m)
adcp_AccelerometerX (Adcp Accelerometer X)
adcp_AccelerometerY (Adcp Accelerometer Y)
adcp_AccelerometerZ (Adcp Accelerometer Z)
adcp_Ambiguity
adcp_Heading
adcp_MagnetometerTemperature (Adcp Magnetometer Temperature)
adcp_MagnetometerX (Adcp Magnetometer X)
adcp_MagnetometerY (Adcp Magnetometer Y)
adcp_MagnetometerZ (Adcp Magnetometer Z)
adcp_Pitch
adcp_Pressure
adcp_PressureSensorTemperature (Adcp Pressure Sensor Temperature)
adcp_RTCTemperature
adcp_Roll
adcp_SpeedOfSound (Adcp Speed Of Sound)
adcp_Status
adcp_TransmitEnergy (Adcp Transmit Energy)
adcp_WaterTemperature
adcp_time (time)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
ballast_cmd (glider ballast command, ml)
... (46 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
... (41 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
... (37 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
... (37 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
... (33 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
... (39 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
... (35 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
... (38 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
... (34 more variables)


Summary:
Part of CABLE project. Voice of the Ocean Foundation data from a local source.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
... (39 more variables)


Summary:
Part of CABLE project. Voice of the Ocean Foundation data from a local source.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
... (35 more variables)


Summary:
Part of SWOT project. Voice of the Ocean Foundation data from a local source.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
... (39 more variables)


Summary:
Part of SWOT project. Voice of the Ocean Foundation data from a local source.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
... (35 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
... (39 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
... (35 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
depth_qc (quality control flags for glider depth)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
down_irradiance_380 (Downwelling irradiance value of the 380 nm wavelength, W m-2 nm-1)
... (34 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
cdom (colored dissolved organic matter, mg m-3)
cdom_raw (raw colored dissolved organic matter, counts)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
down_irradiance_380 (Downwelling irradiance value of the 380 nm wavelength, W m-2 nm-1)
down_irradiance_490 (Downwelling irradiance value of the 490 nm wavelength, W m-2 nm-1)
... (30 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
depth_qc (quality control flags for glider depth)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
down_irradiance_380 (Downwelling irradiance value of the 380 nm wavelength, W m-2 nm-1)
down_irradiance_490 (Downwelling irradiance value of the 490 nm wavelength, W m-2 nm-1)
down_irradiance_532 (Downwelling irradiance value of the 532 nm wavelength, W m-2 nm-1)
... (34 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
down_irradiance_380 (Downwelling irradiance value of the 380 nm wavelength, W m-2 nm-1)
down_irradiance_490 (Downwelling irradiance value of the 490 nm wavelength, W m-2 nm-1)
down_irradiance_532 (Downwelling irradiance value of the 532 nm wavelength, W m-2 nm-1)
downwelling_PAR (Downwelling PAR (Photosynthetically Active Radiation) in range 400-700 nm, μE m-2 s-1)
... (30 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
depth_qc (quality control flags for glider depth)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
heading (glider heading angle, degrees)
internal_pressure (Pa)
internal_temperature (Celsius)
... (30 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
density (water salinity, 1e-3)
density_qc (quality control flags for Density)
desired_heading (glider desired heading angle, degrees)
distance_over_ground (distance over ground flown since mission start, km)
dive_num (glider dive number from original SeaExplorer filename, None)
heading (glider heading angle, degrees)
internal_pressure (Pa)
internal_temperature (Celsius)
linear_cmd (glider linear command, cm)
... (26 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
... (40 more variables)


Summary:
Part of CABLE project. Voice of the Ocean Foundation data from a local source.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
... (40 more variables)


Summary:
Part of CABLE project. Voice of the Ocean Foundation data from a local source.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
... (36 more variables)


Summary:
Part of CABLE project. Voice of the Ocean Foundation data from a local source.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
... (42 more variables)


Summary:
Part of CABLE project. Voice of the Ocean Foundation data from a local source.

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
... (38 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
... (41 more variables)


Summary:
Part of SAMBA continuous monitoring

cdm_data_type = TimeSeries
VARIABLES:
latitude (degrees_north)
longitude (degrees_east)
time (seconds since 1970-01-01T00:00:00Z)
depth (glider depth, m)
ad2cp_beam1_cell_number1 (glider beam 1 measure from AD2CP in cell 1, m s-1)
ad2cp_beam2_cell_number1 (glider beam 2 measure from AD2CP in cell 1, m s-1)
ad2cp_beam3_cell_number1 (glider beam 3 measure from AD2CP in cell 1, m s-1)
ad2cp_beam4_cell_number1 (glider beam 4 measure from AD2CP in cell 1, m s-1)
ad2cp_heading (glider heading angle from AD2CP, degrees)
ad2cp_pitch (glider pitch angle from AD2CP, degrees)
ad2cp_pressure (glider pressure from AD2CP, dbar)
ad2cp_roll (glider roll angle from AD2CP, degrees)
ad2cp_time (AD2CP recorded time, seconds since 1970-01-01T00:00:00Z)
altimeter (glider altimeter reading)
angular_cmd (glider angular command, degrees)
angular_pos (glider angular position, degrees)
backscatter_raw (raw 700 nm wavelength backscatter, counts)
backscatter_scaled (700 nm β total volume scattering coefficient at 117 degree angle, m-1 sr-1)
ballast_cmd (glider ballast command, ml)
ballast_pos (glider ballast position, ml)
chlorophyll (mg m-3)
chlorophyll_qc (quality control flags for chlorophyll)
chlorophyll_raw (counts)
conductivity (water conductivity, mS cm-1)
conductivity_qc (quality control flags for water conductivity)
dead_reckoning (None)
declination (degrees)
... (37 more variables)